What is the aging process of aluminum profile shells

Aluminum profile shell is the aluminum profile obtained by means of aluminum stretching through a sawing machine and then processed out of the shell, high flexibility, with good anti-leakage function, the depth can be cut at will, generally there are circuit board slots inside, as long as the circuit board can be inserted directly, no need to fix again, the convenience is incomparable with other kinds of shell, but the aluminum profile shell is generally more waterproof, can be suitable for use in the field and It can be used in the field and in harsh environments.

With waterproof function, made of natural synthetic rubber, fully functional, good performance, beautiful appearance, and can be manufactured according to the needs of consumers to meet the specifications of the shell aluminum profile shell aging process are mainly

Common curtain wall profile, common door and window profile, profile shell, industrial profile, must be aged in the same aging furnace, the temperature inside the furnace is controlled within 195℃±5℃, the temperature is kept warm for 3 hours after reaching the temperature, the furnace is immediately opened after the furnace and blown for 20 minutes to cool, and the quality inspector inspects the hardness.
　
2. Heat-insulating curtain wall profile and heat-insulating door and window profile must be aged in the same aging furnace, the temperature inside the furnace is controlled within 180℃±3℃, and the heat preservation is discharged after reaching the temperature for 3 hours, and the fan is blown for 20 minutes to cool down immediately after discharging, and the hardness is checked by the quality inspector.

3. If the aging heat insulation profile is not satisfied with the furnace, 1~2 frames of common profiles (wall thickness below 2.0mm) can be put into the same furnace for aging, and the aging process is executed according to the process of heat insulation profile.

4. When lifting the material into the furnace, the end of the profile and the air guide are controlled within 80~100mm.

5. When the temperature inside the furnace reaches the temperature required by the process, the aging worker will measure the actual temperature inside the furnace with a glass tube thermometer every 30 minutes and make original records.

The above is the Shenzhen Hongfa Shunda shell company to introduce the latest information about shell processing.